Method of Application:-

a) Surface preparation

The surface to be coated must be solid and clean, free of all traces of paints, coatings, efflorescence, loose particles, grease, oil, demolding agents, dust, gypsum plaster, etc. Remove by water pressure cleaning.

b) Mixing

Mix just with water between 6 and 7 litres per each 25 kg bag.

c) Application

Apply 2 coats of TECHCRYST SUPER with a fibre type brush to form a continuous and uniform coating with a consumption of 2-2.5 kg per sq. mt. Allow water curing for 5 days. Since the crystalline coating is white in colour it would give a white finish avoiding the cost of painting.

*PS Note- Care must be taken that the coating is not subject to hammering, chiseling or any kind of impact for 4 days as this may damage the waterproof film.